Showing posts with label metalsmithing. Show all posts
Showing posts with label metalsmithing. Show all posts

Thursday, March 21, 2013

Girl Power in the Bronze Age!

Example of Bronze Age Jewelry found in Moesgaard Museum
Photo by Dorte Sandorff
Recently outside Vienna Austria the skeletal remains of a woman believe to be a metal worker from the Bronze Age have been unearthed. This tremendous discovery challenges the long held belief that prehistoric women only preformed the less physical and strenuous tasks associated with day to day life. This exciting find now questions long held concepts concerning the division of labor during these primordial ages.

While the pelvic bones were not included in the grave, researchers are confident the remains are of a 45 to 60 year old woman based on the shape of the skull and the size of the lower jawbone.

Contained in the grave was an anvil, hammers, flint chisels and several pieces of dress jewelry. Lower Austrian state archaeologist Dr. Ernst Lauermann said, “It was normal in those days for a person to be buried with the items that were part of their daily working lives.” These tools have led researchers to believe her occupation was a fine metal worker, an uncommon practice for a woman during this time period. Until this discovery, metalworking had always been considered a male profession because of the physicality involved since metals, then like now, were used for more than just making jewelry.

While any ancient burial site from the Bronze Age is considered a great find and a window into how past civilizations lived and ultimately formed our future; this one indicates that earlier cultures were perhaps not as patriarchal as once thought; though some scholars still believe that the significance of these artifacts is unknown. The editor of British Archaeology magazine Mike Pitts stated, “Sometimes the objects could relate to the individual’s profession but they could equally be there because they looked good or were put into the grave by relatives and didn’t belong to the individual.”

So while we will never know the truth, it’s awesome to think that women were challenging societal mores even more than 5,000 years ago!

To read more on this subject and see a photo of the burial site and skeletal remains, follow this link to the MailOnline News.

Monday, September 7, 2009

The first piece of jewelry I made...

I made my first piece of jewelry well over 20 years ago. Sure, I strung macaroni and made construction paper link necklaces years before that...but this was was first metalsmithed piece.

I had an amazing high school art teacher (thank you Mr. Pozun!) and he introduced jewelry making when I was a sophomore (circa 1986 - age 16). The funny part of the story is....I HATED it! We had to lay out our design on a sheet of nickle silver and cut it out. The tedious sawing and filing that followed was TORTURE. And Mr Pozun did all the soldering, so I missed out on the FIRE (aka the fun part)!

I truly discovered my passion for working in metals a year later, while at the PA Governor's School (a summer art camp of sorts) when I was introduced to steel sculpture and braising. Metal + Fire = LOVE!

And a year later, I was in college and concentrating my studies in Jewelry/Metals. Funny how things work out, huh?

To read about my fellow EtsyMetal members' first piece of jewelry, please visit the following blogs:
Andes Cruz http://andescruz.wordpress.com/
Beth Cyr http://bcyrjewelry.blogspot.com
Caitlyn Davey http://discomedusa.typepad.com
Clare Stoker http://clarestoker.blogspot.com
Cynthia Del Giudice http://cynthiadelgiudice.blogspot.com/
Delias Thompson http://deliasstudioinc.blogspot.com
duckduckGoose http://duckduckgoosestuff.co.uk/duckduckBLOG
Kerin Rose http://kerinrose.blogspot.com
Laura Crawford http://tangerinetreehouse.blogspot.com
Libby Rosas http://elizabethrosasjewelry.blogspot.com
Nina Dinoff http://ninadinoff.blogspot.com
Nina Gibson http://ninagibsondesigns.blogspot.com/
Sara Westermark http://sarawestermark.blogspot.com/
Tamra Gentry http://gentrydesignco.typepad.com/
Quercus Silver http://quercussilver.blogspot.com

Monday, April 20, 2009

Not all that glitters is gold...

My fellow Etsymetal member Chris Parry, shared this story with his fellow team mates in our private forums. I felt it was a lesson that needed to be shared with my blog readers as well....

fake-ring-2, originally uploaded by Chris Parry.

"A little story goes with this ring.

A customer brought this into me and asked me if it was real. At the time it was a very shiny gold colour. (It had been gold plated.)

Inside the ring, you can just make out two marks a 750 and a 18k. Both presuming to mean that it is 18k gold.

However, when he gave it to me, the colour of the gold was wrong and the weight as well. The spurious marks also made me feel this ring was a fake.

So I put it under my torch and as you can see the resulting black mess proves that it is just a brass/copper metal underneath.

It does infact look like a plumbers olive. Something used by plumber in the UK when installing water pipes in houses.

The client had bought this ring from a beggar in Lonodon for £5 and his own words, "it was worth a gamble".

You could probably buy a 100 of these olives for a £5.

So the beggar was no ordinary beggar, as he clearly had access to a gold plating unit, so he was in fact probably a scam artist.

Then about six months later, a lady bought an identical ring in to me and I gave her the same bad news, but she insisted it had been in her family for years (Probably just embarrassed that she had parted with good money for a fake)

Be warned you all, not all that glitters is gold"

Sunday, February 22, 2009

The Forever Flower

When I returned home from my recent business trip, I found this beautiful gift waiting for me on my jewelers' bench. My husband and I never get to spend Valentine's Day together because my biggest wholesale show falls over the holiday every year. He made me this flower while I was gone...it will never wilt, fade or loose it's petals...it will last forever.

Friday, September 26, 2008

Friday at the bench...



This week was busy with finishing and shipping lots of orders (wholesale and Etsy). I'm happy to say that next week I will be able to breathe a little easier and concentrate my my terribly neglected office work!




Today, Ben and I poured ingots and pulled wire for a custom ring I need to make. I will have plenty of wire left over, so be on the lookout for some new stacking rings in 14k white, yellow and pink gold... (well, when I'm done with my office work, anyway)

Wednesday, September 10, 2008

Results of the silversmithing workshop #5

To conclude the making of my bud vase...

Now that I have all my parts, I have to make them fit together! I file neck so it will sit flush on the top dome with little or no gaps. This takes a while: taking a little metal off here...checking the fit...taking a little metal off there...checking the fit ...and so on...

Once I have the fit perfect, I mark where I want to neck to be attached to the top dome and cut a hole into it.

Then stitches or burs are raised with a graver to hold the neck from moving (I will show you this a little later) and it is soldered into place.

The next step is to make a seat for the vase to sit on. I air raised a shallow dome into my larger bottom hemisphere.
Then the top inside egde is marked for placement and burs are raised to hold the two halves together during soldering. This technique of raising burs to keep things from sliding around was new to me and I love it! When I was taught in school, we used binding wire...which sometimes distorts your work and sticks to it. :(

It is soldered upside down so solder can be added to the lip (which will be removed later).

It's together!
The lip is sawed off and filed.

Lastly, the piece is heated, pickled and brass brushed many times over to raise the fine silver to the surface and give it this final finish. TA DA!

Wednesday, September 3, 2008

Results of the silversmithing workshop #4

The making of my base vase, continued...

The next step in making my bud vase was to sink my second disc. You do this by hammering the disc into a piece of wood with a shallow bowl chiseled out.
After I sunk it to my desired shape, I then planished it. Now that I have my two main parts, I have to trim and file the bottom hemisphere so it will can be soldered to the top dome.

The next step is to make the pieces for the neck of the vase. I decided to use the scrap left from cutting out my discs. I laid out the shapes in paper and glued them to my metal so I could accurately cut the pieces out. Then I formed them on a mandrel.

Once I had the neck pieces formed, I soldered them together.
Tomorrow I will show you how I finished the bud vase...

Tuesday, September 2, 2008

Results of the silversmithing workshop #3

I wanted to continue these postings about my silversmithing workshop last week...but other things came up! So I will continue today....

Here it is...my final project during the Brian Clarke silversmithing workshop...my bud vase!

I began by cutting out 2 sterling discs, annealing them and then began crimp raising one disc for the bottom half of the vase.



After several coures of raising, the shape is close to my template size.

Then I planished the hemisphere on a mushroom stake.


I wonder how many hammer blows it took to make it look like this? I wasn't counting! :) This portion of the bud vase took a full day (plus a few hours)...
I will continue with the top portion of the vase tomorrow...Have a good day!

Wednesday, August 27, 2008

Metalsmith's Exhibition in Print

Everyone else is talking about it, so I may as well jump on the bandwagon...

"Metalsmith EIP, Another Diaster?" is a recent discussion on Ganoskin's Orchid forum concerning the recently published Metalsmith Exhibition in Print "Equilibrium: Body as Site". It has been a heated debate concerning not only this issue of the magazine but the state of SNAG as a metals organization.

My first impression when the magazine arrived in my mailbox was "UGH!" I thumbed through the pages quickly and set the magazine down in mild disgust. A few days past before I picked it up again. After I recovered from my initial disappointment and really looked at the magazine, my feelings changed. I have accepted the fact that this is an exhibition...and as an exhibition the concept "Body as Site" is intriguing and very well curated. This exhibition blurs the line between sculpture, performance art and wearable object...actually many of the pieces step over the line. Meaning, they are sculpture or performance art NOT wearable object. With that said, Am I fond of all the work in this exhibition? No...but I do like many of them and I don't have to like all of the items to believe that the exhibition is successful.
"Farthingale" by Jesse Mathes
(one of the pieces I did like!)

The question is (as debated on Ganoskin's Orchid forum): Does sculpture and performance art belong in a periodical (entitled "Metalsmith: Jewelry * Design * Metal Arts") that is published by a membership driven organization (entitled "Society of North American Goldsmiths")? My opinion is: Yes...as long as the organization, it's programs and it's publications honestly represent it's members on a regular basis. I think it is healthy for the organization to have an exhibition which allows the viewers to see something new and look at things in a new way...even if it upsets them.

The next question is: Do the members of SNAG believe the organization, it's programs and it's publications honestly represent them regular basis? According to the discussion on Ganoskin's Orchid forum, many DO NOT. And I have to admit, that I let my membership to SNAG drop several years ago because I felt unrepresented. With that said, my husband still is a member and believes strongly in the organization, so Metalsmith is always in my home.

This is the statement you will find on SNAG's website: "Who is SNAG? The Society of North American Goldsmiths stands for passion, innovation and excellence in jewelry, design and metalsmithing. SNAG creates community, professional connections, and the unfettered exchange of information." And this is the statement you will find on the editor's page of every Metalsmith magazine: "Metalsmith's mission is to document, analyze, and promote excellence in jewelry and metalworking" Perhaps with these lively Orchid debates and SNAG's current financial crisis, they will listen to their members (and X-members) concerns/needs and try something new and look at things in a new way...even if it upsets them.

Friday, August 22, 2008

I've been searched!

A quick Friday post...When we went to Ireland for our silversmithing workshop, we took a bunch of copper, sterling silver, solder and jeweler's sawblades---packed it in our checked baggage and crossed our fingers. Not to our surprise, they searched our bags and left us this nice tape to let us know...

Wednesday, August 20, 2008

Results of the silversmithing workshop #2

Yesterday, I shared with you the first lesson of Brian Clarke's silversmithing workshop - sinking. Today, I will show the the second exercise:

CRIMP RAISING
Brian shows me how to make the crimps

Brian demonstrates raising on a oval stake with a nylon mallet

Ben and I give it a try...

This is what it looks like after a few courses of raising...not very pretty...

...but this is what it looks like when it is finished! Lovely!

Tomorrow I will show you the final projects---Ben made a goblet and I made a flower bud vase.

Tuesday, August 19, 2008

Results of the silversmithing workshop #1

It has been a very busy summer for me...
Juggling daycare & nanny schedules for my boys...organizing a surprise birthday party for my husband...day to day jewelry business operations...a long overdue 2.5 week vacation...a summer wholesale show...
I have a lot to share with you and don't know where to begin! I'll start by sharing a few of my photos from the silversmithing workshop Ben & I took in Ireland. Today's post will show you the first lesson:

SINKING A HEMISPHERE
Brian shows us how to sink a disk into a hemisphere

Ben starts sinking his disk

Danielle planishes her hemisphere

TA DA! From disk to hemisphere!